Z8 Encore! XP Applications Library
---------------------------------------------------------------------------
Thank you for your interest in ZiLOG’s Z8 Enocre! XP series of microcontrollers.
Contact Information
--------------------------------------------------------------------------
For Technical Support visit the customer support page on http://www.zilog.com
Table of Contents
-----------------------------------------------------------------------
- Changes from Previous Releases
- Compatibility
- Library contents
- Closed Change Requests
- Open Change Requests
Changes from Previous Releases
---------------------------------------------------------------------------
Rev 1.0.0 -This is the first version of this library.
Rev 1.1.0- Added following project:
1. Using Z8 Encore! XP MCU for current measurement
Rev 1.2.0- Added following project:
1. Z8 Encore! XP F0830 based low cost NiMH battery charger
Compatibility
---------------------------------------------------------------------------
This version of library is validated using the following:
--ZiLOG ZDS II - Z8 Encore! 4.10.1
Library contents
---------------------------------------------------------------------------
Z8 Encore! XP 8 Pin Dimmer
This application depicts the usage of Z8 Encore! XP 8 Pin microcontroller for dimmer application.
The dimmer discussed here supports both 50Hz and 60Hz AC frequencies.
The dimmer intensity is controlled by a potentiometer.The on-chip peripherals such
as comparator, analog to digital converter (ADC) and timer of the
Z8 Encore! XP 8 pin microcontroller are used in the development of dimmer application.
Sourcing Power Over Ethernet
This Reference Design describes ZiLOG’s Z8 Encore! XP® based power sourcing
equipment(PSE) design for power over Ethernet(POE) enabled devices connected to local area network (LAN).
Power over Ethernet is a cost-effective solution which allows data and power to be
sourced over the same Ethernet cable connected to power devices (PD) such as VOIP telephones, WLAN transmitters, and security
cameras. Power devices are connected to PSE using standard Ethernet cable
with no separate power supply connection.
Using Z8 Encore! XP MCU for current measurement
This Application describes the process of measuring current using the Trans-impedance
Amplifier with the help of ADC.
Z8 Encore! XP F0830 based low cost NiMH battery charger
This Application describes the process of charging of NiMH battery by controlling the PWM
dutycycle dynamically on the basis of efficient feed back using ADC.
Closed Change Requests
---------------------------------------------------------------------------
Source Code
None
Documentation
None
Open Change Requests
---------------------------------------------------------------------------
Source Code
None
Documentation
None