The Current-Sensing Power Switch SCR with ZMOTION Control reference design integrates a ZMOTION Detection Module II and an AC Power Switch Relay based on the IXYS CPC1966 Module to create a motion-controlled current-sensing power switch. The CPC1966 Module includes dual, optically-isolated SCR outputs with enhanced zero-crossing detection circuitry to minimize load distortion. The ZMOTION Detection Module II is based on Zilog's Z8FS040 MCU to provide a 5 m (on-axis) and 6 m (60-degree off-axis) detection pattern.
After motion is detected, the AC switch is activated, providing power to the load until 30 seconds after motion stops, at which time the AC switch is deactivated. The hardware and software components in this reference design can be used as a basis for developing motion-controlled power-switching solutions.
The Current-Sensing Power Switch SCR with ZMOTION Control Reference Design ships with the following items:
Base Power Board
ZMOTION Detection Module II (affixed to the Base Power Board)
Get started developing your ZMOTION application today! Purchase this Current-Sensing Power Switch SCR with ZMOTION Control Reference Design (Product ID #RD10034) from the Zilog Store.